Active Components Categories
Filter by Active Components Paramters
Filter By Price
Showing 19–36 of 55 results
View cart “ULN2803 – DIP 18” has been added to your cart.
CH552G 8-bit USB Device Micro-controller
Rated 0 out of 5
In stock
SKU:
TO-97246
CH554G MCU 8-bit Enhanced USB
Rated 0 out of 5
In stock
SKU:
TO-61162
- 79% Faster then E8051
- ROM: 16KB
- DataFlash: 128-byte
- RAM: 256-byte
- xRAM: 1KB
- Built-in USB controller
- Support USB type-C master-slave
- Timer:3 sets of MCS51 timers (T0/T1/T2)
- Capture:Timer T2 is extended to support 2-channel signal capture
- PWM: 2 PWM outputs, PWM1 and PWM2, are 2-channel 8-bit PWM outputs
- UART: 2 UARTs, both support higher communication baud rate
- SPI: The SPI controller has built-in FIFO
- ADC: 4-channel 8-bit analog digital converter
- Touch-key: 6-channel capacitance detection
- supports up to 15 touchkeys
- GPIO: Up to 17 GPIO pins
- Interrupt: It supports 14 sets of interrupt signal sources
- Watch-Dog: 8-bit presettable watchdog timer WDOG, support timing interrupt
- Reset: 4 kinds of reset signal sources
- Clock: Built-in 24 MHz clock source
- Power: Built-in 5V to 3.3V low dropout voltage regulator
- Weight : 0.15 g
CJ2310 S10 SOT23 N-CH MOSFET
Rated 0 out of 5
In stock
SKU:
TO-53913
- Continuous Drain Current: 3A
- Threshold Voltage: 2V at 250µA
- Drain-Source Voltage (Vdss): 60V
- Operating Temperature: Up to +150℃
- Power Dissipation: 350mW
- Breakdown Voltage of Grid and Source: ±20V
- Polarization: N-channel
- Storage Temperature: From -55 to +150℃
- Lead Quantity: 3 Pins
- Dimensions (L x W/Size): 3.00 x 1.40mm
- Rated Current: 3A
- Rdson (Maximum) for Different IDs and Vgs: 125mΩ
DB107S – 1A Diode Bridge SMD
Rated 0 out of 5
In stock
SKU:
TO-16398
DS1307 RTC IC SMD
Rated 0 out of 5
In stock
SKU:
TO-12132
- serial real-time clock (RTC)
- 56-byte, battery-backed, nonvolatile (NV) RAM for data storage
- Two-wire serial interface
- Programmable square wave output signal
- Automatic power-fail detect and switch circuitry
- Consumes less than 500 nA in battery backup mode with oscillator running
- Operating Supply Current: 1.5 mA
- Operating Temperature: – 40 C ~ + 85 C
- Supply Voltage: 5.5 ~ 4.5 V
EL817 Optocoupler
Rated 0 out of 5
In stock
SKU:
TO-54194
EL817S1(C)(TU)-F – Optocoupler 1-CH 5000Vrms 4-Pin SMD
Rated 0 out of 5
Out of stock
SKU:
TO-65897
- Part Number: EL817S1 (C) (TU) – F
- Number of Channels: 1 Channel
- Forward current: 60mA
- Reverse voltage: 6V
- Voltage - Isolation:5000Vrms
- Break Down Voltage: 150mW
- Collector current: 50mA
- Maximum Collector-Emitter Voltage: 80V
- Emitter-Collector voltage: 7V
- Maximum Collector Current: 40mA
- Operating temperature: up to +110°C
- Mounting Type: SMD
HR8833 IC TSSOP 16
Rated 0 out of 5
In stock
SKU:
TO-41582
- Type: Motor Driver
- IC Model: HR8833
- Package: TSSOP16
- Power Supply Voltage Range: 2.7 V – 12.8 V
- Low MOSFET On-Resistance: HS + LS 400 mΩ
- PWM Winding Current Regulation/Limiting
- Dual-H-Bridge Current-Control Motor Driver
- Capable of Driving Two DC Motors or One Stepper Motor
- 1.5-A RMS per H-Bridge
- Outputs Can Be Paralleled for 3-A RMS
HX710B 24bit ADC
Rated 0 out of 5
In stock
SKU:
TO-81994
- Type: Analog-to-digital converter (ADC)
- IC Model: HX710B
- Mounting: SMD
- Operation supply voltage range: 2.6 5.5V
- Operation temperature range: -40 +85°C
- On-chip power-on-reset
- On-chip temperature measurement (HX701A)
- DVDD and AVDD supply voltage difference measurement
- On-chip low noise amplifier with a gain of 128
- Selectable IOSPS or 40SPS output data rate
- Simultaneous 50 and 60Hz supply rejection
- 8-pin SOP-8 package
HX710B 24bit ADC THT
Rated 0 out of 5
In stock
SKU:
TO-87296
- Type: Analog-to-digital converter (ADC)
- IC Model: HX710B
- Mounting: Through hole
- Operation supply voltage range: 2.6 5.5V
- Operation temperature range: -40 +85°C
- On-chip power-on-reset
- On-chip temperature measurement (HX701A)
- DVDD and AVDD supply voltage difference measurement
- On-chip low noise amplifier with a gain of 128
- Selectable IOSPS or 40SPS output data rate
- Simultaneous 50 and 60Hz supply rejection
- 8-pin SOP-8 package
- Weight : 0.47 g
J3Y NPN SOT-23 SMD S8050
Rated 0 out of 5
In stock
SKU:
TO-24171
LM2596HVS-5.0 Step Down Regulator – Fixed Output 5V – TO-263
Rated 0 out of 5
In stock
SKU:
TO-56216
LM2596R-5.0 TO263 HTC 5V@3A Fixed 150kHz Step-Down Switching Regulator
Rated 0 out of 5
In stock
SKU:
TO-15869
LM2596S-ADJ
Rated 0 out of 5
In stock
SKU:
TO-75895
LM317T THT
Rated 0 out of 5
In stock
SKU:
TO-41566
- Product Name: LM317T
- Type: Voltage Regulator
- Package Type: Through-Hole (THT)
- Output Voltage: Adjustable from 1.25V to 37V
- Output Current: Up to 1.5A
- Input Voltage Range: Up to 40V
- Weight : 1.89 g
- Features:
- Adjustable output voltage through external resistors.
- Internal current limiting and thermal shutdown protection.
- Wide temperature range operation (-40°C to +125°C).
LM324 Quard OP-AMP
Rated 0 out of 5
In stock
SKU:
TO-76173
- Short Circuited Protected Outputs
- True Differential Input StageSingle Supply Operation: 3.0 V to 32 V
- Low Input Bias Currents: 100 nA Maximum (LM324A)
- Four Amplifiers Per Package
- Internally Compensated
- Common Mode Range Extends to Negative Supply
- Industry Standard Pinouts
- ESD Clamps on the Inputs Increase Ruggedness without Affecting Device Operation
- NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
- These Devices are Pb−Free, Halogen Free/BFR Free and RoHS-compliant
- Weight : 0.14 g
LM363 amp
Rated 0 out of 5
In stock
SKU:
TO-14475
- Type: Op-amp
- Model: LM363
- Monolithic true instrumentation amplifier.
- Fixed gains of 10, 100, and 1000 without external components.
- Precision performance through on-chip trimming.
- Super-beta bipolar input stage for low input bias current and voltage noise.
- High common-mode rejection ratio.
- Two-stage amplifier design with open-loop gain of 10,000,000.
- Operates from -5V to -18V with low current consumption.
- Ideal for low-level transducers.
- Ultra-high common-mode rejection for demanding applications.
- Pin-strappable gains for easy configuration.
- Twin differential shield drivers for bandwidth preservation.
- Compensation pins for noise reduction.
- Separate output force, sense, and reference pins for gain programming.
- Available in 16-pin DIP and 8-pin metal can packages.
- Wide temperature range: 0°C to 70°C.
- Weight : 0.47 g
-