Active Components

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: shift register
Model: 74HC595D
Supply Voltage: 5V
Supply current: 70mA
Total power dissipation: 500mW
8-bit serial input
8-bit serial or parallel output
100 MHz (typical) shift out frequency

74HC595D NXP SOP16 SMD

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: NXP shift register
Model: 74HC595D
Supply Voltage: 5V
Supply current: 70mA
Total power dissipation: 500mW
8-bit serial input
8-bit serial or parallel output
100 MHz (typical) shift out frequency

8051 NuMicro MS51 Microcontroller IC 8-Bit nuVoton MS51PCOAE

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

core Processor: 8051 8-8it 24MHz
Connectivity: 12C, SPI, UART/USART
Peripherals: Brown-out Detect/Reset, LVR, POR, PWM, WDT
Number of I/0 : 30
Program Memory Size: 32KB (32K x 8)
Program Memory Type: FLASH
RAM Size: 2K x 8
Voltage - Supply (VCC/Vdd): 24V 5.5V
Operating Temperature: -40°C ~ 105°C
4-priority-level interrupts capability.
Mounting Type: SMD
Package / Case: 32-LQFP
Dual Data Pointers (DPTRs)
POR with 1.15V threshold voltage level
LVR with 2.0V threshold voltage level
Default 16 MHz high-speed internal oscillator (HIRC) trimmed to ±1% (accuracy at 25 °C, 3.3 V)
Selectable 24 MHz high-speed internal oscillator (HIRC)

8051 W79 Microcontroller IC 8-Bit 24MHz 2KB nuVoton (W79E2051AKG)

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Fully static design 8-bit Turbo 51 CMOS microcontroller up to 24MHz
Single power: 2.4~5.5V Up to 12MHz, 4.5~5.5V up to 24MHz
Instruction set compatible with MCS-51
4K/2K bytes of Program Flash EPROM
256 bytes of on-chip RAM
Two 16-bit timer/counters
9 Interrupt source with four levels of priority
One channel 10-bit PWM output
One analog Comparator
Operating Temperature: -40~85℃

AD620AN Amplifier

Opamp

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: Amplifier
Model: AD620AN
Gain range: 1 to 10,000
Wide power supply range: ±2.3 V to ±18 V
Higher performance than 3 op-amp IA designs
Pin: 8
Low power: 1.3A
bandwidth: 120 kHz

ADS1232 ADC

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

• Complete front-end for bridge sensors • 23.5-bits effective resolution at gain = 1 • 19.2-bits noise-free resolution at gain = 64 • Low-noise PGA • Selectable gains of 1, 2, 64, and 128 • RMS noise: – 17 nV at 10 SPS at gain = 128 – 44 nV at 80 SPS at gain = 128 • 100-dB simultaneous 50-Hz and 60-Hz rejection • Flexible clocking: – Low-drift internal oscillator – Optional external crystal • Selectable 10-SPS or 80-SPS data rates • Easy ratiometric measurements: – External voltage reference up to 5 V • Two-channel differential input with internal temperature sensor (ADS1232) • Two-wire serial interface • Supply voltage range: 2.7 V to 5.3 V • Temperature range: –40°C to +105°C • Packages: TSSOP-24 (ADS1232)

AMS1117-3.3V 1A SOT223Voltage Regulator IC

Power Regulator

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Voltage Regulator IC
AMS1117
Output voltage: 3.3V
Output Current: 1A
input voltage: 4.75V to 12V
Built-in Thermal Shutdown
Short-Circuit Current Limiting Function
SMD

APM32F103C8T6 microcontroller ARM Cortex-M3 64KB FLASH 20KB 48-LQFP

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

System Architecture - 32-bit Arm® Cortex®-M3 core - Up to 96MHz working frequency
Clock and Memories - HSECLK: 4MHz~16MHz externa
Power supply and low-power mode - 2.0 ~ 3.6 V reset supply voltage - Support programmable Volta
FPU - Independent FPU module supports floating point operation
ADCs and Temperature Sensor - 2 12-bit ADCs, 16 input channels are supported - ADC voltage conversion range: 0~VDDA - Double-sample and hold capability supported - 1 on-chip temperature sensor
I/O - 80/51/37/26 I/Os selectable, depending on models and packages - All I/O pins are mappable to o 16 external interrupt
Communication Interfaces - 3 USARTs, support ISO7816, LIN and IrDA - 2 I2C, support SMBus/PMBus - 2 SPIs with a maximum transfer speed of 18Mbps - 1 QSPI, support single - and four-wire access to Flash - 1 USB 2.0 FS Device - 1 CAN 2.0B, USBD and CAN can work independently at the same time
1 CRC Unit
96-bit UID
Serial wire debug SWD and JTAG interfaces

BTA16 600B 16A 600V THT

Triac

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: Medium current Triac
Model:
Current Rating: 16A.
Voltage Rating: 600V
Package Type: Through-Hole (THT).
Internal ceramic pad.
Applications:
- Mains power AC switching
- Ideal for ON/OFF functions in static relays, heating regulation, and induction motor starting circuits
- phase control operations in light dimmers and appliance motor speed controllers.

Compare

Quick view

Add to wishlist

CH551G 8Bit ADC – 8051 Core MCU – 32MHz – 16KB Flash

Rated 0 out of 5

In stock

Program Storage Size: 10KB
RAM Size: 768Byte
16Bit Timer: 3
PWM (Bit): 8bit
Internal Oscillator
Operating Temperature Range:-40℃~+85℃
Operating Voltage Range: 3.3V~5V
CPU Core: 51Series
CPU Maximum Speed: 24MHz

CH552G 8-bit USB Device Micro-controller

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Enhanced E8051 core CPU
8-15 times faster than the standard MCS51
Code Flash: 16KB
XRAM: 1KB
iRAM: 256B
DataFlash: 128B
Built-in BootLoader
Built-in USB controller
USB transceiver
Support USB 2.0 full speed 12Mbps or low speed 1.5Mbps.
Built-in 24MHz clock source and PLL

CH554G MCU 8-bit Enhanced USB

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

79% Faster then E8051
ROM: 16KB
DataFlash: 128-byte
RAM: 256-byte
xRAM: 1KB
Built-in USB controller
Support USB type-C master-slave
Timer:3 sets of MCS51 timers (T0/T1/T2)
Capture:Timer T2 is extended to support 2-channel signal capture
PWM: 2 PWM outputs, PWM1 and PWM2, are 2-channel 8-bit PWM outputs
UART: 2 UARTs, both support higher communication baud rate
SPI: The SPI controller has built-in FIFO
ADC: 4-channel 8-bit analog digital converter
Touch-key: 6-channel capacitance detection
supports up to 15 touchkeys
GPIO: Up to 17 GPIO pins
Interrupt: It supports 14 sets of interrupt signal sources
Watch-Dog: 8-bit presettable watchdog timer WDOG, support timing interrupt
Reset: 4 kinds of reset signal sources
Clock: Built-in 24 MHz clock source
Power: Built-in 5V to 3.3V low dropout voltage regulator

DB107S – 1A Diode Bridge SMD

Diodes & Rectifiers New

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

DB107S
Diode Bridge
Current rating: 1A
Voltage rating: 1000V
AC to DC Converter
Highly Efficient and Reliable

DS1307 RTC IC SMD

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

serial real-time clock (RTC)
56-byte, battery-backed, nonvolatile (NV) RAM for data storage
Two-wire serial interface
Programmable square wave output signal
Automatic power-fail detect and switch circuitry
Consumes less than 500 nA in battery backup mode with oscillator running
Operating Supply Current: 1.5 mA
Operating Temperature: – 40 C ~ + 85 C
Supply Voltage: 5.5 ~ 4.5 V

EL817 Optocoupler

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: Optocoupler
Model: EL817
Current transfer ratio:50~600%
High isolation voltage between input and output
Creepage distance > 7.62mm
Operating temperature up to +110°C
Pb-free and RoHS-compliant
Programmable controllers
Telecommunication equipment

EL817S1(C)(TU)-F – Optocoupler 1-CH 5000Vrms 4-Pin SMD

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Part Number: EL817S1 (C) (TU) – F
Number of Channels: 1 Channel
Forward current: 60mA
Reverse voltage: 6V
Voltage - Isolation:5000Vrms
Break Down Voltage: 150mW
Collector current: 50mA
Maximum Collector-Emitter Voltage: 80V
Emitter-Collector voltage: 7V
Maximum Collector Current: 40mA
Operating temperature: up to +110°C
Mounting Type: SMD

HR8833 IC TSSOP 16

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: Motor Driver
IC Model: HR8833
Package: TSSOP16
Power Supply Voltage Range: 2.7 V – 12.8 V
Low MOSFET On-Resistance: HS + LS 400 mΩ
PWM Winding Current Regulation/Limiting
Dual-H-Bridge Current-Control Motor Driver
Capable of Driving Two DC Motors or One Stepper Motor
1.5-A RMS per H-Bridge
Outputs Can Be Paralleled for 3-A RMS

Active Components

Parts which are capable to control and amplify voltage and current actively like ICs. Transistors, Mosfets, Diodes and Triacs.

0 products

Showing 1–18 of 40 results

Show 9 12 18 24

74HC4051 ic 8-Channel Analog Multiplexer Demultiplexer

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: Analog Multiplexer/Demultiplexer
Model:74HC4051
Wide analog input voltage range: -5 V to +5 V
CMOS low power dissipation
High noise immunity
Complies with JEDEC standards • JESD8C (2.7 V to 3.6 V) • JESD7A (2.0 V to 6.0 V)
Latch-up performance exceeds 100 mA
Low ON resistance: • 80 Ω (typical) at VCC - VEE = 4.5 V • 70 Ω (typical) at VCC - VEE = 6.0 V • 60 Ω (typical) at VCC - VEE = 9.0 V
Typical ‘break before make’ built-in

74HC595D 8bit shift register SMD

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: shift register
Model: 74HC595D
Supply Voltage: 5V
Supply current: 70mA
Total power dissipation: 500mW
8-bit serial input
8-bit serial or parallel output
100 MHz (typical) shift out frequency

74HC595D NXP SOP16 SMD

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: NXP shift register
Model: 74HC595D
Supply Voltage: 5V
Supply current: 70mA
Total power dissipation: 500mW
8-bit serial input
8-bit serial or parallel output
100 MHz (typical) shift out frequency

8051 NuMicro MS51 Microcontroller IC 8-Bit nuVoton MS51PCOAE

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

core Processor: 8051 8-8it 24MHz
Connectivity: 12C, SPI, UART/USART
Peripherals: Brown-out Detect/Reset, LVR, POR, PWM, WDT
Number of I/0 : 30
Program Memory Size: 32KB (32K x 8)
Program Memory Type: FLASH
RAM Size: 2K x 8
Voltage - Supply (VCC/Vdd): 24V 5.5V
Operating Temperature: -40°C ~ 105°C
4-priority-level interrupts capability.
Mounting Type: SMD
Package / Case: 32-LQFP
Dual Data Pointers (DPTRs)
POR with 1.15V threshold voltage level
LVR with 2.0V threshold voltage level
Default 16 MHz high-speed internal oscillator (HIRC) trimmed to ±1% (accuracy at 25 °C, 3.3 V)
Selectable 24 MHz high-speed internal oscillator (HIRC)

8051 W79 Microcontroller IC 8-Bit 24MHz 2KB nuVoton (W79E2051AKG)

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Fully static design 8-bit Turbo 51 CMOS microcontroller up to 24MHz
Single power: 2.4~5.5V Up to 12MHz, 4.5~5.5V up to 24MHz
Instruction set compatible with MCS-51
4K/2K bytes of Program Flash EPROM
256 bytes of on-chip RAM
Two 16-bit timer/counters
9 Interrupt source with four levels of priority
One channel 10-bit PWM output
One analog Comparator
Operating Temperature: -40~85℃

AD620AN Amplifier

Opamp

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: Amplifier
Model: AD620AN
Gain range: 1 to 10,000
Wide power supply range: ±2.3 V to ±18 V
Higher performance than 3 op-amp IA designs
Pin: 8
Low power: 1.3A
bandwidth: 120 kHz

ADS1232 ADC

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

AMS1117-3.3V 1A SOT223Voltage Regulator IC

Power Regulator

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Voltage Regulator IC
AMS1117
Output voltage: 3.3V
Output Current: 1A
input voltage: 4.75V to 12V
Built-in Thermal Shutdown
Short-Circuit Current Limiting Function
SMD

APM32F103C8T6 microcontroller ARM Cortex-M3 64KB FLASH 20KB 48-LQFP

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

System Architecture - 32-bit Arm® Cortex®-M3 core - Up to 96MHz working frequency
Clock and Memories - HSECLK: 4MHz~16MHz externa
Power supply and low-power mode - 2.0 ~ 3.6 V reset supply voltage - Support programmable Volta
FPU - Independent FPU module supports floating point operation
ADCs and Temperature Sensor - 2 12-bit ADCs, 16 input channels are supported - ADC voltage conversion range: 0~VDDA - Double-sample and hold capability supported - 1 on-chip temperature sensor
I/O - 80/51/37/26 I/Os selectable, depending on models and packages - All I/O pins are mappable to o 16 external interrupt
Communication Interfaces - 3 USARTs, support ISO7816, LIN and IrDA - 2 I2C, support SMBus/PMBus - 2 SPIs with a maximum transfer speed of 18Mbps - 1 QSPI, support single - and four-wire access to Flash - 1 USB 2.0 FS Device - 1 CAN 2.0B, USBD and CAN can work independently at the same time
1 CRC Unit
96-bit UID
Serial wire debug SWD and JTAG interfaces

BTA16 600B 16A 600V THT

Triac

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: Medium current Triac
Model:
Current Rating: 16A.
Voltage Rating: 600V
Package Type: Through-Hole (THT).
Internal ceramic pad.
Applications:
- Mains power AC switching
- Ideal for ON/OFF functions in static relays, heating regulation, and induction motor starting circuits
- phase control operations in light dimmers and appliance motor speed controllers.

Compare

Quick view

Add to wishlist

CH551G 8Bit ADC – 8051 Core MCU – 32MHz – 16KB Flash

Rated 0 out of 5

In stock

Program Storage Size: 10KB
RAM Size: 768Byte
16Bit Timer: 3
PWM (Bit): 8bit
Internal Oscillator
Operating Temperature Range:-40℃~+85℃
Operating Voltage Range: 3.3V~5V
CPU Core: 51Series
CPU Maximum Speed: 24MHz

CH552G 8-bit USB Device Micro-controller

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Enhanced E8051 core CPU
8-15 times faster than the standard MCS51
Code Flash: 16KB
XRAM: 1KB
iRAM: 256B
DataFlash: 128B
Built-in BootLoader
Built-in USB controller
USB transceiver
Support USB 2.0 full speed 12Mbps or low speed 1.5Mbps.
Built-in 24MHz clock source and PLL

CH554G MCU 8-bit Enhanced USB

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

79% Faster then E8051
ROM: 16KB
DataFlash: 128-byte
RAM: 256-byte
xRAM: 1KB
Built-in USB controller
Support USB type-C master-slave
Timer:3 sets of MCS51 timers (T0/T1/T2)
Capture:Timer T2 is extended to support 2-channel signal capture
PWM: 2 PWM outputs, PWM1 and PWM2, are 2-channel 8-bit PWM outputs
UART: 2 UARTs, both support higher communication baud rate
SPI: The SPI controller has built-in FIFO
ADC: 4-channel 8-bit analog digital converter
Touch-key: 6-channel capacitance detection
supports up to 15 touchkeys
GPIO: Up to 17 GPIO pins
Interrupt: It supports 14 sets of interrupt signal sources
Watch-Dog: 8-bit presettable watchdog timer WDOG, support timing interrupt
Reset: 4 kinds of reset signal sources
Clock: Built-in 24 MHz clock source
Power: Built-in 5V to 3.3V low dropout voltage regulator

DB107S – 1A Diode Bridge SMD

Diodes & Rectifiers New

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

DB107S
Diode Bridge
Current rating: 1A
Voltage rating: 1000V
AC to DC Converter
Highly Efficient and Reliable

DS1307 RTC IC SMD

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

serial real-time clock (RTC)
56-byte, battery-backed, nonvolatile (NV) RAM for data storage
Two-wire serial interface
Programmable square wave output signal
Automatic power-fail detect and switch circuitry
Consumes less than 500 nA in battery backup mode with oscillator running
Operating Supply Current: 1.5 mA
Operating Temperature: – 40 C ~ + 85 C
Supply Voltage: 5.5 ~ 4.5 V

EL817 Optocoupler

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: Optocoupler
Model: EL817
Current transfer ratio:50~600%
High isolation voltage between input and output
Creepage distance > 7.62mm
Operating temperature up to +110°C
Pb-free and RoHS-compliant
Programmable controllers
Telecommunication equipment

EL817S1(C)(TU)-F – Optocoupler 1-CH 5000Vrms 4-Pin SMD

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Part Number: EL817S1 (C) (TU) – F
Number of Channels: 1 Channel
Forward current: 60mA
Reverse voltage: 6V
Voltage - Isolation:5000Vrms
Break Down Voltage: 150mW
Collector current: 50mA
Maximum Collector-Emitter Voltage: 80V
Emitter-Collector voltage: 7V
Maximum Collector Current: 40mA
Operating temperature: up to +110°C
Mounting Type: SMD

HR8833 IC TSSOP 16

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: Motor Driver
IC Model: HR8833
Package: TSSOP16
Power Supply Voltage Range: 2.7 V – 12.8 V
Low MOSFET On-Resistance: HS + LS 400 mΩ
PWM Winding Current Regulation/Limiting
Dual-H-Bridge Current-Control Motor Driver
Capable of Driving Two DC Motors or One Stepper Motor
1.5-A RMS per H-Bridge
Outputs Can Be Paralleled for 3-A RMS

Active Components

Parts which are capable to control and amplify voltage and current actively like ICs. Transistors, Mosfets, Diodes and Triacs.

0 products

Showing 1–18 of 40 results

Show 9 12 18 24

74HC4051 ic 8-Channel Analog Multiplexer Demultiplexer

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: Analog Multiplexer/Demultiplexer
Model:74HC4051
Wide analog input voltage range: -5 V to +5 V
CMOS low power dissipation
High noise immunity
Complies with JEDEC standards • JESD8C (2.7 V to 3.6 V) • JESD7A (2.0 V to 6.0 V)
Latch-up performance exceeds 100 mA
Low ON resistance: • 80 Ω (typical) at VCC - VEE = 4.5 V • 70 Ω (typical) at VCC - VEE = 6.0 V • 60 Ω (typical) at VCC - VEE = 9.0 V
Typical ‘break before make’ built-in

74HC595D 8bit shift register SMD

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: shift register
Model: 74HC595D
Supply Voltage: 5V
Supply current: 70mA
Total power dissipation: 500mW
8-bit serial input
8-bit serial or parallel output
100 MHz (typical) shift out frequency

74HC595D NXP SOP16 SMD

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: NXP shift register
Model: 74HC595D
Supply Voltage: 5V
Supply current: 70mA
Total power dissipation: 500mW
8-bit serial input
8-bit serial or parallel output
100 MHz (typical) shift out frequency

8051 NuMicro MS51 Microcontroller IC 8-Bit nuVoton MS51PCOAE

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

core Processor: 8051 8-8it 24MHz
Connectivity: 12C, SPI, UART/USART
Peripherals: Brown-out Detect/Reset, LVR, POR, PWM, WDT
Number of I/0 : 30
Program Memory Size: 32KB (32K x 8)
Program Memory Type: FLASH
RAM Size: 2K x 8
Voltage - Supply (VCC/Vdd): 24V 5.5V
Operating Temperature: -40°C ~ 105°C
4-priority-level interrupts capability.
Mounting Type: SMD
Package / Case: 32-LQFP
Dual Data Pointers (DPTRs)
POR with 1.15V threshold voltage level
LVR with 2.0V threshold voltage level
Default 16 MHz high-speed internal oscillator (HIRC) trimmed to ±1% (accuracy at 25 °C, 3.3 V)
Selectable 24 MHz high-speed internal oscillator (HIRC)

8051 W79 Microcontroller IC 8-Bit 24MHz 2KB nuVoton (W79E2051AKG)

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Fully static design 8-bit Turbo 51 CMOS microcontroller up to 24MHz
Single power: 2.4~5.5V Up to 12MHz, 4.5~5.5V up to 24MHz
Instruction set compatible with MCS-51
4K/2K bytes of Program Flash EPROM
256 bytes of on-chip RAM
Two 16-bit timer/counters
9 Interrupt source with four levels of priority
One channel 10-bit PWM output
One analog Comparator
Operating Temperature: -40~85℃

AD620AN Amplifier

Opamp

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Type: Amplifier
Model: AD620AN
Gain range: 1 to 10,000
Wide power supply range: ±2.3 V to ±18 V
Higher performance than 3 op-amp IA designs
Pin: 8
Low power: 1.3A
bandwidth: 120 kHz

ADS1232 ADC

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

AMS1117-3.3V 1A SOT223Voltage Regulator IC

Power Regulator

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

Voltage Regulator IC
AMS1117
Output voltage: 3.3V
Output Current: 1A
input voltage: 4.75V to 12V
Built-in Thermal Shutdown
Short-Circuit Current Limiting Function
SMD

APM32F103C8T6 microcontroller ARM Cortex-M3 64KB FLASH 20KB 48-LQFP

Rated 0 out of 5

In stock

(Excluding. of GST 18%)

System Architecture - 32-bit Arm® Cortex®-M3 core - Up to 96MHz working frequency
Clock and Memories - HSECLK: 4MHz~16MHz externa
Power supply and low-power mode - 2.0 ~ 3.6 V reset supply voltage - Support programmable Volta
FPU - Independent FPU module supports floating point operation
ADCs and Temperature Sensor - 2 12-bit ADCs, 16 input channels are supported - ADC voltage conversion range: 0~VDDA - Double-sample and hold capability supported - 1 on-chip temperature sensor
I/O - 80/51/37/26 I/Os selectable, depending on models and packages - All I/O pins are mappable to o 16 external interrupt
Communication Interfaces - 3 USARTs, support ISO7816, LIN and IrDA - 2 I2C, support SMBus/PMBus - 2 SPIs with a maximum transfer speed of 18Mbps - 1 QSPI, support single - and four-wire access to Flash - 1 USB 2.0 FS Device - 1 CAN 2.0B, USBD and CAN can work independently at the same time
1 CRC Unit
96-bit UID
Serial wire debug SWD and JTAG interfaces

BTA16 600B 16A 600V THT

Triac

Rated 0 out of 5

In stock

(Excluding. of GST 18%)