View cart “ADS1232 ADC” has been added to your cart.
Showing 109–126 of 224 results
74HC4051 ic 8-Channel Analog Multiplexer Demultiplexer
Rated 0 out of 5
In stock
SKU:
TO-66987
- Type: Analog Multiplexer/Demultiplexer
- Model:74HC4051
- Wide analog input voltage range: -5 V to +5 V
- CMOS low power dissipation
- High noise immunity
- Complies with JEDEC standards • JESD8C (2.7 V to 3.6 V) • JESD7A (2.0 V to 6.0 V)
- Latch-up performance exceeds 100 mA
- Low ON resistance: • 80 Ω (typical) at VCC - VEE = 4.5 V • 70 Ω (typical) at VCC - VEE = 6.0 V • 60 Ω (typical) at VCC - VEE = 9.0 V
- Typical ‘break before make’ built-in
74HC595 8 Bit Shift Register – SMD – SOIC-16
Rated 0 out of 5
In stock
SKU:
TO-46242
74HC595D 8bit shift register SMD
Rated 0 out of 5
In stock
SKU:
TO-82776
74HC595D NXP SOP16 SMD
Rated 0 out of 5
In stock
SKU:
TO-59113
75R SMD Resistor 0805
Rated 0 out of 5
Out of stock
SKU:
TO-42247
8 pin IC Socket
Rated 0 out of 5
In stock
SKU:
TO-44416
8 Pin JST XH Connector male – 2.5mm Top Entry Header
Rated 0 out of 5
In stock
SKU:
TO-81169
8051 NuMicro MS51 Microcontroller IC 8-Bit nuVoton MS51PCOAE
Rated 0 out of 5
In stock
SKU:
TO-32317
- core Processor: 8051 8-8it 24MHz
- Connectivity: 12C, SPI, UART/USART
- Peripherals: Brown-out Detect/Reset, LVR, POR, PWM, WDT
- Number of I/0 : 30
- Program Memory Size: 32KB (32K x 8)
- Program Memory Type: FLASH
- RAM Size: 2K x 8
- Voltage - Supply (VCC/Vdd): 24V 5.5V
- Operating Temperature: -40°C ~ 105°C
- 4-priority-level interrupts capability.
- Mounting Type: SMD
- Package / Case: 32-LQFP
- Dual Data Pointers (DPTRs)
- POR with 1.15V threshold voltage level
- LVR with 2.0V threshold voltage level
- Default 16 MHz high-speed internal oscillator (HIRC) trimmed to ±1% (accuracy at 25 °C, 3.3 V)
- Selectable 24 MHz high-speed internal oscillator (HIRC)
8051 W79 Microcontroller IC 8-Bit 24MHz 2KB nuVoton (W79E2051AKG)
Rated 0 out of 5
In stock
SKU:
TO-69584
- Fully static design 8-bit Turbo 51 CMOS microcontroller up to 24MHz
- Single power: 2.4~5.5V Up to 12MHz, 4.5~5.5V up to 24MHz
- Instruction set compatible with MCS-51
- 4K/2K bytes of Program Flash EPROM
- 256 bytes of on-chip RAM
- Two 16-bit timer/counters
- 9 Interrupt source with four levels of priority
- One channel 10-bit PWM output
- One analog Comparator
- Operating Temperature: -40~85℃
82K SMD Resistor 0805
Rated 0 out of 5
Out of stock
SKU:
TO-69875
82R SMD Resistor 0805
Rated 0 out of 5
Out of stock
SKU:
TO-87897
8MHz crystal oscillator SMD
Rated 0 out of 5
In stock
SKU:
TO-75715
9 pin JST XH, 2.5mm, One side Female with 30cm Wires
Rated 0 out of 5
In stock
SKU:
TO-49844
AD620AN Amplifier
Rated 0 out of 5
In stock
SKU:
TO-76191
ADS1232 ADC
Rated 0 out of 5
In stock
SKU:
TO-13171
• Complete front-end for bridge sensors
• 23.5-bits effective resolution at gain = 1
• 19.2-bits noise-free resolution at gain = 64
• Low-noise PGA
• Selectable gains of 1, 2, 64, and 128
• RMS noise:
– 17 nV at 10 SPS at gain = 128
– 44 nV at 80 SPS at gain = 128
• 100-dB simultaneous 50-Hz and 60-Hz rejection
• Flexible clocking:
– Low-drift internal oscillator
– Optional external crystal
• Selectable 10-SPS or 80-SPS data rates
• Easy ratiometric measurements:
– External voltage reference up to 5 V
• Two-channel differential input with internal
temperature sensor (ADS1232)
• Two-wire serial interface
• Supply voltage range: 2.7 V to 5.3 V
• Temperature range: –40°C to +105°C
• Packages: TSSOP-24 (ADS1232)
AMS1117-3.3V 1A SOT223Voltage Regulator IC
Rated 0 out of 5
In stock
SKU:
TO-94133
APM32F103C8T6 microcontroller ARM Cortex-M3 64KB FLASH 20KB 48-LQFP
Rated 0 out of 5
In stock
SKU:
TO-19963
- System Architecture - 32-bit Arm® Cortex®-M3 core - Up to 96MHz working frequency
- Clock and Memories - HSECLK: 4MHz~16MHz externa
- Power supply and low-power mode - 2.0 ~ 3.6 V reset supply voltage - Support programmable Volta
- FPU - Independent FPU module supports floating point operation
- ADCs and Temperature Sensor - 2 12-bit ADCs, 16 input channels are supported - ADC voltage conversion range: 0~VDDA - Double-sample and hold capability supported - 1 on-chip temperature sensor
- I/O - 80/51/37/26 I/Os selectable, depending on models and packages - All I/O pins are mappable to o 16 external interrupt
- Communication Interfaces - 3 USARTs, support ISO7816, LIN and IrDA - 2 I2C, support SMBus/PMBus - 2 SPIs with a maximum transfer speed of 18Mbps - 1 QSPI, support single - and four-wire access to Flash - 1 USB 2.0 FS Device - 1 CAN 2.0B, USBD and CAN can work independently at the same time
- 1 CRC Unit
- 96-bit UID
- Serial wire debug SWD and JTAG interfaces