Showing all 4 results
8051 NuMicro MS51 Microcontroller IC 8-Bit nuVoton MS51PCOAE
Rated 0 out of 5
In stock
SKU:
TO-32317
- core Processor: 8051 8-8it 24MHz
- Connectivity: 12C, SPI, UART/USART
- Peripherals: Brown-out Detect/Reset, LVR, POR, PWM, WDT
- Number of I/0 : 30
- Program Memory Size: 32KB (32K x 8)
- Program Memory Type: FLASH
- RAM Size: 2K x 8
- Voltage - Supply (VCC/Vdd): 24V 5.5V
- Operating Temperature: -40°C ~ 105°C
- 4-priority-level interrupts capability.
- Mounting Type: SMD
- Package / Case: 32-LQFP
- Dual Data Pointers (DPTRs)
- POR with 1.15V threshold voltage level
- LVR with 2.0V threshold voltage level
- Default 16 MHz high-speed internal oscillator (HIRC) trimmed to ±1% (accuracy at 25 °C, 3.3 V)
- Selectable 24 MHz high-speed internal oscillator (HIRC)
8051 W79 Microcontroller IC 8-Bit 24MHz 2KB nuVoton (W79E2051AKG)
Rated 0 out of 5
In stock
SKU:
TO-69584
- Fully static design 8-bit Turbo 51 CMOS microcontroller up to 24MHz
- Single power: 2.4~5.5V Up to 12MHz, 4.5~5.5V up to 24MHz
- Instruction set compatible with MCS-51
- 4K/2K bytes of Program Flash EPROM
- 256 bytes of on-chip RAM
- Two 16-bit timer/counters
- 9 Interrupt source with four levels of priority
- One channel 10-bit PWM output
- One analog Comparator
- Operating Temperature: -40~85℃
CH554G MCU 8-bit Enhanced USB
Rated 0 out of 5
In stock
SKU:
TO-61162
- 79% Faster then E8051
- ROM: 16KB
- DataFlash: 128-byte
- RAM: 256-byte
- xRAM: 1KB
- Built-in USB controller
- Support USB type-C master-slave
- Timer:3 sets of MCS51 timers (T0/T1/T2)
- Capture:Timer T2 is extended to support 2-channel signal capture
- PWM: 2 PWM outputs, PWM1 and PWM2, are 2-channel 8-bit PWM outputs
- UART: 2 UARTs, both support higher communication baud rate
- SPI: The SPI controller has built-in FIFO
- ADC: 4-channel 8-bit analog digital converter
- Touch-key: 6-channel capacitance detection
- supports up to 15 touchkeys
- GPIO: Up to 17 GPIO pins
- Interrupt: It supports 14 sets of interrupt signal sources
- Watch-Dog: 8-bit presettable watchdog timer WDOG, support timing interrupt
- Reset: 4 kinds of reset signal sources
- Clock: Built-in 24 MHz clock source
- Power: Built-in 5V to 3.3V low dropout voltage regulator