Active Components Categories
Filter by Active Components Paramters
Filter By Price
Showing 10–18 of 41 results
BTA16 600B 16A 600V THT
Rated 0 out of 5
In stock
SKU:
TO-63628
- Type: Medium current Triac
- Model:
- Current Rating: 16A.
- Voltage Rating: 600V
- Package Type: Through-Hole (THT).
- Internal ceramic pad.
- Applications:
- Mains power AC switching
- Ideal for ON/OFF functions in static relays, heating regulation, and induction motor starting circuits
- phase control operations in light dimmers and appliance motor speed controllers.
CH552G 8-bit USB Device Micro-controller
Rated 0 out of 5
In stock
SKU:
TO-97246
CH554G MCU 8-bit Enhanced USB
Rated 0 out of 5
In stock
SKU:
TO-61162
- 79% Faster then E8051
- ROM: 16KB
- DataFlash: 128-byte
- RAM: 256-byte
- xRAM: 1KB
- Built-in USB controller
- Support USB type-C master-slave
- Timer:3 sets of MCS51 timers (T0/T1/T2)
- Capture:Timer T2 is extended to support 2-channel signal capture
- PWM: 2 PWM outputs, PWM1 and PWM2, are 2-channel 8-bit PWM outputs
- UART: 2 UARTs, both support higher communication baud rate
- SPI: The SPI controller has built-in FIFO
- ADC: 4-channel 8-bit analog digital converter
- Touch-key: 6-channel capacitance detection
- supports up to 15 touchkeys
- GPIO: Up to 17 GPIO pins
- Interrupt: It supports 14 sets of interrupt signal sources
- Watch-Dog: 8-bit presettable watchdog timer WDOG, support timing interrupt
- Reset: 4 kinds of reset signal sources
- Clock: Built-in 24 MHz clock source
- Power: Built-in 5V to 3.3V low dropout voltage regulator
DB107S – 1A Diode Bridge SMD
Rated 0 out of 5
In stock
SKU:
TO-16398
DS1307 RTC IC SMD
Rated 0 out of 5
In stock
SKU:
TO-12132
- serial real-time clock (RTC)
- 56-byte, battery-backed, nonvolatile (NV) RAM for data storage
- Two-wire serial interface
- Programmable square wave output signal
- Automatic power-fail detect and switch circuitry
- Consumes less than 500 nA in battery backup mode with oscillator running
- Operating Supply Current: 1.5 mA
- Operating Temperature: – 40 C ~ + 85 C
- Supply Voltage: 5.5 ~ 4.5 V
EL817 Optocoupler
Rated 0 out of 5
In stock
SKU:
TO-54194
EL817S1(C)(TU)-F – Optocoupler 1-CH 5000Vrms 4-Pin SMD
Rated 0 out of 5
In stock
SKU:
TO-65897
- Part Number: EL817S1 (C) (TU) – F
- Number of Channels: 1 Channel
- Forward current: 60mA
- Reverse voltage: 6V
- Voltage - Isolation:5000Vrms
- Break Down Voltage: 150mW
- Collector current: 50mA
- Maximum Collector-Emitter Voltage: 80V
- Emitter-Collector voltage: 7V
- Maximum Collector Current: 40mA
- Operating temperature: up to +110°C
- Mounting Type: SMD
HR8833 IC TSSOP 16
Rated 0 out of 5
In stock
SKU:
TO-41582
- Type: Motor Driver
- IC Model: HR8833
- Package: TSSOP16
- Power Supply Voltage Range: 2.7 V – 12.8 V
- Low MOSFET On-Resistance: HS + LS 400 mΩ
- PWM Winding Current Regulation/Limiting
- Dual-H-Bridge Current-Control Motor Driver
- Capable of Driving Two DC Motors or One Stepper Motor
- 1.5-A RMS per H-Bridge
- Outputs Can Be Paralleled for 3-A RMS