Microcontroller Archives - TechTOnions.com

Login / Register

0 items ₹0.00

0 items ₹0.00

Showing all 6 results

Show 9 12 18 24

Placeholder

Add to wishlist

8051 NuMicro MS51 Microcontroller IC 8-Bit nuVoton MS51PCOAE

Microcontroller

Rated 0 out of 5

In stock

(Including. of GST 18%)

SKU: TO-32317

core Processor: 8051 8-8it 24MHz
Connectivity: 12C, SPI, UART/USART
Peripherals: Brown-out Detect/Reset, LVR, POR, PWM, WDT
Number of I/0 : 30
Program Memory Size: 32KB (32K x 8)
Program Memory Type: FLASH
RAM Size: 2K x 8
Voltage - Supply (VCC/Vdd): 24V 5.5V
Operating Temperature: -40°C ~ 105°C
4-priority-level interrupts capability.
Mounting Type: SMD
Package / Case: 32-LQFP
Dual Data Pointers (DPTRs)
POR with 1.15V threshold voltage level
LVR with 2.0V threshold voltage level
Default 16 MHz high-speed internal oscillator (HIRC) trimmed to ±1% (accuracy at 25 °C, 3.3 V)
Selectable 24 MHz high-speed internal oscillator (HIRC)

Placeholder

Add to wishlist

8051 W79 Microcontroller IC 8-Bit 24MHz 2KB nuVoton (W79E2051AKG)

Microcontroller

Rated 0 out of 5

In stock

(Including. of GST 18%)

SKU: TO-69584

Fully static design 8-bit Turbo 51 CMOS microcontroller up to 24MHz
Single power: 2.4~5.5V Up to 12MHz, 4.5~5.5V up to 24MHz
Instruction set compatible with MCS-51
4K/2K bytes of Program Flash EPROM
256 bytes of on-chip RAM
Two 16-bit timer/counters
9 Interrupt source with four levels of priority
One channel 10-bit PWM output
One analog Comparator
Operating Temperature: -40~85℃

Placeholder

Add to wishlist

APM32F103C8T6 microcontroller ARM Cortex-M3 64KB FLASH 20KB 48-LQFP

Microcontroller

Rated 0 out of 5

In stock

(Including. of GST 18%)

SKU: TO-19963

System Architecture - 32-bit Arm® Cortex®-M3 core - Up to 96MHz working frequency
Clock and Memories - HSECLK: 4MHz~16MHz externa
Power supply and low-power mode - 2.0 ~ 3.6 V reset supply voltage - Support programmable Volta
FPU - Independent FPU module supports floating point operation
ADCs and Temperature Sensor - 2 12-bit ADCs, 16 input channels are supported - ADC voltage conversion range: 0~VDDA - Double-sample and hold capability supported - 1 on-chip temperature sensor
I/O - 80/51/37/26 I/Os selectable, depending on models and packages - All I/O pins are mappable to o 16 external interrupt
Communication Interfaces - 3 USARTs, support ISO7816, LIN and IrDA - 2 I2C, support SMBus/PMBus - 2 SPIs with a maximum transfer speed of 18Mbps - 1 QSPI, support single - and four-wire access to Flash - 1 USB 2.0 FS Device - 1 CAN 2.0B, USBD and CAN can work independently at the same time
1 CRC Unit
96-bit UID
Serial wire debug SWD and JTAG interfaces

Placeholder

Add to wishlist

ATMEGA3287-PU

Rated 0 out of 5

In stock

(Including. of GST 18%)

SKU: TO-15617

131 instructions executed swiftly in a single clock cycle.
32 x 8 general-purpose working registers.
Fully static operation ensures stability.
Achieves up to 20MIPS at 20MHz.
On-chip 2-cycle multiplier for efficient arithmetic.
Flash memory: 10,000 write/erase cycles; EEPROM: 100,000 cycles.
Optional boot code with independent lock bits.
In-system programming via on-chip boot program.
True read-while-write operation.
Programming lock for software security.
Atmel® QTouch® library support.
Up to 64 sense channels for touch interfaces.

Placeholder

Add to wishlist

SMT32F103C8T6 BLUE Pill Dev Board

Rated 0 out of 5

In stock

(Including. of GST 18%)

SKU: TO-64489

Blue Pill Development Board
Microcontroller: STM32F103C8
Core: Arm Cortex-M3
M ax. Clock Speed: 72MHz
Package: LQFP 48 pins
Internal Flash: 64KiB
SRAM: 20KiB
Debug mode: SWD.
2.0-3.6V power, I/O.
Reset(POR/PDR).
4-16MHz crystal.
72MHz work frequency.
64K flash memory, 20K SRAM.
With a mini USB interface, you can give the board a power supply and USB communication onboard.
Size:5.3cm x 2.3cm.

Placeholder

Add to wishlist

STM32F103C8T6 – 32bit Arm Cortex-M3 Microcontroller with 72MHz 64kB Flash 48-Pin LQFP

Microcontroller

Rated 0 out of 5

In stock

(Including. of GST 18%)

SKU: TO-56288

Arm ® 32-bit Cortex ®-M3 CPU core – 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access – Single-cycle multiplication and hardware division
Memories – 64 or 128 Kbytes of Flash memory – 20 Kbytes of SRAM
Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR, and programmable voltage detector (PVD) – 4 to 16 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC – PLL for CPU clock – 32 kHz oscillator for RTC with calibration
Low-power – Sleep, Stop and Standby modes – V BAT supply for RTC and backup registers
2x 12-bit, 1 μs A/D converters (up to 16 channels) – Conversion range: 0 to 3.6 V – Dual-sample and hold capability – Temperature sensor
DMA – 7-channel DMA controller – Peripherals supported: timers, ADC, SPIs, I2 Cs and USARTs
Up to 80 fast I/O ports
Debug mode: – Serial wire debug (SWD) and JTAG interfaces
Up to nine communication interfaces – Up to two I 2 C interfaces (SMBus/PMBus ®) – Up to three USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) – Up to two SPIs (18 Mbit/s) – CAN interface (2.0B Active) – USB 2.0 full-speed interface
CRC calculation unit, 96-bit unique ID

Sign in

7bd3d3f431" />

No account yet?

Create an Account